We are an accredited testing laboratory with focus on testing the performance parameters of radiators, convectors and small air-conditioning units. We perform tests of radiators with thermal outputs from 200 to 3 500 W. Our testing laboratory uses two fully automated test rooms, thanks to which we are able to react very easily and promptly to our customers' requirements. The test rooms are among the most modern ones in Europe and their construction and measuring technologies meet the stringent requirements for accredited test rooms.
We hold the relevant accreditations, we have links to HLK Stuttgart reference laboratory and we are included in the list of the notified bodies that underwent the RRT covered by SG03-WG1 work group. We therefore meet all the requirements of the following articles of the standards: EN 442-2:2014 Annex J, EN 442-2:2014 Annex I.
Our Radiator Test Station has been included amongst the prestigious accredited test laboratories approved by DIN CERTCO (Reg. No. PL271). Our test reports can therefore be used to obtain this certification mark of quality. Marking your products with DIN Geprüft marks will enhance their credibility not only on the European market but also on the other markets worldwide.
Thanks to the cooperation with the certification body DIN CERTCO, in 2020 we were recognized as an accredited laboratory of the European RADMAC group, in accordance with all requirements for radiators, convectors and floor convectors with a fan according to test standards EN 442 and EN 16430. The European RADMAC Group is concerned with the harmonization of all voluntary quality labels for radiators in Europe. The individual certification bodies will accept our test reports and grant the manufacturers the certification marks listed in the program of the European RADMAC group. All this at reduced costs resulting from the combined visits and multiple measurements needed to cover all certification marks in the system.
To obtain one of the voluntary certification marks, please contact us and we will arrange access to the RADMAC program for you. Once you have completed the requirements of the RADMAC program (inspections and verification tests), you will receive the certification marks of each member body.
At present, we are able to perform accredited tests of the most types of radiators, such as: classic radiators, floor convectors, fan assisted radiators, ceiling mounted radiant panels, wall convectors, and chilled beams. The test room technologies are designed for measurement of radiators according to the following standards: EN 442, EN 16430, EN 14518, EN 15116, and EN 14037.
|Conformity assessment according to directives
|Construction products (CPR)
|EU no. 305/2011
|Ecodesign of local heaters
|EU no. 1188/2015
The technology of the test chambers is adapted for the measurement of radiators according to standards:
|Group of products
|Ceiling mounted radiant panels
|Chilled beams - active
|Chilled beams - pasive
|Ventilation for buildings - Chilled ceilings
This standard applies to measurements of thermal output of the radiators with natural forced convection of air, which are arranged on / above the floor.
This standard applies to measurements of thermal output and cooling capacity of the radiators with forced convection, installed in floors, or above. It also applies to floor convectors with natural convection.
The portfolio of our services also includes various ancillary services, with the aim of providing our customers with a comprehensive package that contains everything that is necessary for placing a product on the European market:
By cooperating with SZU, you will obtain comprehensive services, whereby the final product for you will be a certificate and a report on assessment of the performance of construction product (AVCP) according to System 3, attesting the quality of your product. Based on these documents, you will be able to directly issue the Declaration of Performance (DoP).
If you wish to know how we process the applications for a Conformity Assessment, here is the step by step approach, put briefly:
If you are interested in any of our services, please contact us.
Our experts will contact you soon and specify the details of your inquiry.
After clarifying the details we will prepare a final offer for you.
You will then fill in a binding order.
After signing the contract, we will start to execute your order.
16. 2. 2021
Our testing laboratory has been recognized in the European RADMAC group by the certification body DIN CERTCO, in accordance with all requirements for radiators, convectors and floor convectors with a fan according to test standards EN 442 and EN 16430.
2. 4. 2020
Our Heat and Environment-friendly Equipment test station has a new testing device for measuring of dust particles in the dilution tunnel for EPA certification.